Deerfield II

About the Deerfield II

The Deerfield II is Lopi's upgraded cast iron pellet stove, offering an EPA-tested rating of up to 50,250 BTU per hour and 80.1% efficiency thanks to a cast iron heat exchanger that extracts more heat than traditional designs. The 60-pound hopper delivers up to 35 hours of burn time, and the feed system handles all pellet grades. It has simple controls (Start and Stop buttons with Heat and Fan knobs), can be connected to a wall thermostat, and meets EPA 2020 certification.

Specifications

Heating Area

Up to 2,500 sq ft

BTU Output

14,500 to 50,250 BTU/hr (EPA tested)

Efficiency

80.1% (HHV)

Emissions

1.5 g/hr

Dimensions (H x W x D)

32.625 in x 28.25 in x 25 in

Weight

400 lbs

Glass Viewing Area

165 sq in, black mirrored ceramic glass

Maximum Burn Time

Up to 35 hours on low

Hopper Capacity

60 lbs

Convection Fan

Two 90 CFM fans, standard

Flue

3 in exhaust; 3 in or 4 in Type L pellet vent, horizontal or vertical, or a Class A chimney with adapter

Hearth Pad

Non-combustible floor protector (26 gauge minimum) under the full stove, extending 6 in past the front and sides of the loading and ash doors, and under and 2 in around a vent tee if used

Electrical

115 V, 60 Hz, 6 A; about 480 W at start-up, 300 W running

Installation

Mobile home approved with outside air and floor bolt-down (not in a sleeping room); alcove approved; straight or corner placement; hearth-stove install in a masonry or zero-clearance fireplace (US only)

Manuals & Documents

• Owner's Manual (Installation and Operation) PDF, 16 MB
• Spec Sheet PDF, 4.2 MB
• Brochure PDF, 1.5 MB

Manufacturer documents from Travis Industries. Each opens in a new tab.